Latronix AB Laser Components

Back to our Lasers >>

Laser Components
Apart from complete lasers,
we also sell laser components.

OEM-laser modules >> Laser optics >> Laser drivers >> Laser diodes >> Brackets >> Optical filters >>

OEM-laser modules

The laser module M660 has a 660 nm wavelength and is available with 1 mW and 5 mW optical powers. The case is made of brass, the diameter is 10.4 mm and the length is 17 mm. The module is delivered with 1500 mm cable. The input voltage is galvanic separated from the shield.

* Compact

* Complete with drive card

* The plastic collimator is focusable

* Storage temperature, Tstg: -40 to +85º C

Technical specifications M660-5 Tc=25ºC

Optical output power, Po: 5mW

Laser diode reverse voltage: 2V

Photo diode reverse voltage: 30V

Operating temperature, Topr: -10 to +60º C

MTTF (typically): 10.000 h

Notice!

M660 is an OEM laser module. If you will operate the laser module for a longer period, build it in in an aluminium housing which is 40*40*5mm to provide god heat sink.

The laser module is sensitive against static electricity and must therefore be treated with proper ESD equipment. The Power Supply you use must be filtrated and well regulated.

Electrical and optical specifications

Optical output power: 5mW

Threshold current (typ./max.): 20/40mA

Operating current (typ./max.): 40/60mA

Operating voltage (typ.): 2.7V

Lasing wavelength (min/typ/max): 655/660/665nm

Beam divergence (typ./max.): 5/11°

Beam divergence (typ./max.): 25/37°

Monitor Current (typ./max.): 10/20uA

Astigmatism (typ.): 11um

Up >>

Laser optics

Glass collimators
DL-2A

Focal Length: 8.35mm

F/#: 1:1.6

Back Focal Length: 5.09mm

Design Wavelength: 670mm (±10 mm)

Lens Construction: 3E.3G (Glass)

Beam Divergence: 2.0mrad

Spot Size: Dia. 20mm (10 meter)

Dimension: M9mm-P0.5mm x L9.5mm

Line optics etc
We sell different optics to our lasers. Please contact us if you have any questions!
Phone: +46(0)8-446 48 30, Mail: sales@latronix.se

Up >>

Laser drivers

Driver (not modulable)

Driver 1290

* Input voltage 2.7-6V (2p. 1.5V batteries might be used)

* Size: 49x12.2x9.5mm

Modulable driver
Analogue modulation

Driver 1290 modulation 0-100 kHz

	The drive card can be used for analogue modulation of laser diodes
	Input voltage 3-6V
	Size: 49x12.2x9.5mm

Digital modulation
Drivers with digital modulation are available up to 300kHz.

Up >>

Laser diodes

We have plenty of different laser diodes. Some of them are presented in the table below.

Please contact us if you have further questions!
Phone: +46(0)8-446 48 30, Mail: sales@latronix.se

Technical data: Laser diodes	SANYO DL-3148-025	SANYO DL-4148-031	SANYO DL-5038-021	SANYO DL-4147-062
Wavelength	635nm (light red)	635nm (light red)	635nm (light red)	650nm (hot red)
Output power	5mW	10mW	30mW	10mW
Diameter	5.6mm	5.6mm	9mm	5.6mm
Threshold Current (typ./max.)	20/35mA	40/60mA	50/70mA	30/50mA
Operating Current (typ./max.)	30/45mA	60/80mA	90/110mA	50/70mA
Operating Voltage (typ./max.)	2.2/2.4V	2.3/2.5V	2.4/2.7V	2.3/2.6V
Lasing Wavelength (typ./max.)	630/640nm	635/645nm	635/645nm	650/660nm
Beam Divergence; (min/typ/max) Perpendicular/Parallel	25/30/35° 6/8/10°	25/30/35° 6/8/10°	25/30/35° 6/7/9°	23/30/35° 7/8/10°
Off Axis Angle; Perpendicular/ Parallel	±3° ±3°	±2° ±2°	±3° ±3°	±3° ±2°
Differential Efficiency (min/typ/max)	-/0.4/- mW/mA	-/0.5/- mW/mA	-/0.7/- mW/mA	0.2/0.5/0.8 mW/mA
Monitoring Output Current (min/typ/max)	0.08/0.2/0.5mA	0.05/0.15/0.4mA	0.1/0.3/0.4mA	0.1/0.3/0.5mA
Astigmatism (typ.)	-/8/-µm	-/8/-µm	-/10/-µm	-/8/-µm
Po	5mW	10mW	30mW	10mW

*: -034/-234: maximum 645nm

Up >>

Brackets

We manufature and sell brackets that fit our LD- and LRD-lasers. The brackets are easy to use and have very high precision.

Please contact us if you have further questions!
Phone: +46(0)8-446 48 30, Mail: sales@latronix.se

Bracket model BV20
Bracket BV20 fits LD-Lasers

The bracket model BV20 allow easy, rapid installation. Using a bar makes it possible to assemble several lasers tight together.

Bracket model BVD
Bracket BVD fits LD-Lasers

Bracket model BVD is small and adjustable in x and y directions. It has high stability and aluminium design.

Bracket model BV54
Bracket BV54 fits LRD-Lasers

The bracket model BV54 allow easy, rapid installation. Using a bar makes it possible to assemble several lasers tight together.

Bracket BV Rod and BV Angle Iron
Fits to bracket model BV20 and BV54

Up >>

Optical filters

Interference filters can be used on e.g. cameras.

Latronix AB sells different interference filters with different sizes, wavelengths and bandwidths.

Technical data: Filters	632.8/10/80-2R	636/10/50-2U	650/40/75-2U	670/40/75-2R	670/40/75-4U	532.0/10/75-4R
Wavelength	633nm	636nm	650nm	670nm	670nm	532nm
Bandwidth	±10nm	±10nm	±40nm	±40nm	±40nm	±10nm
Transmission	80%	50%	75%	75%	75%	75%
Diameter	12.5mm	12.5mm	12.7mm	12.5mm	25mm	25mm
Extra	damp-protection ring	-	-	damp-protection ring	-	damp-protection ring

to top>>