Circle Lasers

Material optimization within the manufacturing industry

Circle laser LBD is a laser product that rationalizes work with curved and circled shapes. The diameter of the circle is set on a control unit by a pushbutton for "increase" and "decrease". LATRONIX circle lasers can be used in several types of industries.

The laser light is either red with the wavelength 635nm, model LBD6-635C-230, or green with the wavelength 532nm, model LBD-532C-230.

Our Circle Laser is available even in a version which also shows the centre of the circle with a crosshair.

The circle laser has three lifting eyebolts fastened on the rear end surface that can be used to attach the laser to the ceiling above the working area. It can also be delivered with an adjustable bracket

Latronix Circle Laser can be used within different types of industries
Cirkellaser
  • Cable drum manufacturer (se picture below)
  • Joinery shops
  • Sheet-metal shops
  • Foundries
  • Workshops

Distance in meter Min. diameter in mm Max. diameter in mm Line width in mm
1 260 1490 0.5-1
2 500 2900 1
3 750 4310 1-2
Model codes

LDBX-YC-Z
X = output power in miliwatt, Y = wavelength in nanometre, C = optics, Z = input power

Example: LBD6-532C-230 is a circle laser with 6mW output power, 532nm wavelength (green), built-in optics and 230V AC input power.

Cirkellaser för materialoptimering
Technical specifications
  • Degree of protection: IP65 (for the laser unit)
  • Electrical connection: 100-240V AC, 50-60Hz
  • CE-mark: EMC-standard class 4
  • Operating temperature: Red laser -10°C to +40°C,
    Green laser +10°C to +30°C
  • Typical lifetime at 25°C: Approx. 30.000 hours for the red laser
    Approx. 10.000 hours for the green laser
  • Laser class:
Our Circle Laser make use for optimizing the material with production of e.g. cable drums.